ES 350 V6-3.5L (2GR-FE) (2007)
A.
Apply seal packing in a continuous line as shown.
Seal packing:
Toyota Genuine Seal Packing Black, Three Bond 1207B, or equivalent
Seal diameter:
3.0 4.0 mm (0.118 0.156 in.)
NOTE
^
Remove any oil from the contact surface.
^
Install the oil pan No. 2 within 3 minutes after applying seal packing.
^
Do NOT start the engine for at LEAST 2 hours after installing.
B.
Install the oil pan with the 16 bolts and 2 nuts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
20.
Install the cylinder head cover sub-assembly (for bank 1).
A.
Apply seal packing as shown.
Seal packing:
Toyota Genuine Seal Packing Black, Three Bond 1207B, or equivalent
NOTE
^
Remove any oil from the contact surface.