ES 350 V6-3.5L (2GR-FE) (2007)
5. REMOVE ENGINE ROOM SIDE COVER LH
6. REMOVE ENGINE ROOM SIDE COVER RH
7. REMOVE V-BANK COVER SUB-ASSEMBLY
8. REMOVE AIR CLEANER INLET ASSEMBLY
9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
11. REMOVE NO. 1 AIR CLEANER INLET
12. REMOVE FRONT SUSPENSION UPPER CENTER BRACE
13. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
14. REMOVE VVT SENSOR (for Bank 1 Intake Side)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
15. REMOVE VVT SENSOR (for Bank 1 Exhaust Side)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
16. REMOVE VVT SENSOR (for Bank 2 Intake Side)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
17. REMOVE VVT SENSOR (for Bank 2 Exhaust Side)