ES 350 V6-3.5L (2GR-FE) (2007)
Compressor Clutch: Overhaul
DISASSEMBLY
1. REMOVE MAGNETIC CLUTCH ASSEMBLY
a. Place the compressor and magnetic clutch in a vise.
b. Using locking pliers, hold the magnetic clutch hub.
c. Remove the bolt, magnetic clutch hub, and magnetic clutch washers.
HINT: There is no set number of magnetic clutch washers because they are used for adjustment.
d. Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor.
NOTE: Take care not to damage the seal cover of the bearing when removing the snap ring.
e. Disconnect the connector.
f.
Remove the screw.
g. Using a snap ring expander, remove the snap ring and magnetic clutch stator.
REASSEMBLY
1. INSTALL MAGNETIC CLUTCH ASSEMBLY