ES 350 V6-3.5L (2GR-FE) (2007)
1.
Turn the engine switch to the "IG-ON" mode, and push and hold the AUTO" switch for 6 seconds until the zone number (1 - 15) appears on the
display. Then push the switch to select the number of the zone where the vehicle is located.
NOTE:
Pushing the "AUTO" switch for 3 seconds turns the compass display ON or OFF.
See the map for zone reference.
2.
Start the engine, and push and hold the "AUTO" switch for 9 seconds until "C" appears on the display.