ES 350 V6-3.5L (2GR-FE) (2007)
5. REMOVE LOWER INSTRUMENT PANEL SUBASSEMBLY
6. REMOVE NO. 1 SWITCH HOLE BASE
a. Disengage the 4 clips.
b. Disconnect each connector and remove the No. 1 switch hole base.
7. REMOVE LIGHT CONTROL RHEOSTAT
a. Disengage the 2 claws and remove the light control rheostat.
INSTALLATION
1. INSTALL LIGHT CONTROL RHEOSTAT
a. Engage the 2 claws and install the light control rheostat.
2. INSTALL NO. 1 SWITCH HOLE BASE
a. Connect each connector.