ES 350 V6-3.5L (2GR-FE) (2007)
b. Remove the clamp and the turn signal flasher assembly.
INSTALLATION
1. INSTALL TURN SIGNAL FLASHER ASSEMBLY
a. Install the clamp and the turn signal flasher assembly.
b. Connect the connector.
2. INSTALL NO. 1 SWITCH HOLE BASE
3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
5. INSTALL SIDE INSTRUMENT PANEL LH
6. INSTALL FRONT DOOR OPENING TRIM COVER LH
7. INSTALL FRONT DOOR SCUFF PLATE LH