ES 350 V6-3.5L (2GR-FE) (2007)
Vanity Lamp: Testing and Inspection
INSPECTION
1. INSPECT VANITY LIGHT ASSEMBLY
a. Disconnect the Q8 or Q9 vanity light assembly connector.
b. Measure the voltage according to the value(s) in the table.
If the result is not as specified, there is a malfunction on the wire harness side.
c. Apply battery voltage to the vanity light assembly connector.
d. Check that the vanity light comes on.
If the result is not as specified, replace the bulb or vanity light assembly.