ES 350 V6-3.5L (2GR-FE) (2007)
/Page-819004.png)
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor.
INSTALLATION
1. INSTALL VVT SENSOR (for Bank 2 Exhaust Side)
a. Install the VVT sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the VVT sensor connector.
2. INSTALL VVT SENSOR (for Bank 2 Intake Side)
a. Install the VVT sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the VVT sensor connector.
3. INSTALL VVT SENSOR (for Bank 1 Exhaust Side)
