ES 350 V6-3.5L (2GR-FE) (2007)
/Page-852002.png)
6. Connect SST (wire) to the injector and the battery for 15 seconds, and measure the injection volume with the graduated cylinder. Test each
injector 2 or 3 times.
SST 09842-30080
Volume: 84 to 100 cu.cm (5.1 to 6.0 cu in.) in 15 seconds
Difference between each injector: 16 cu.cm (0.98 cu in.) or less
If the injection volume is not as specified, replace the injector.
c. Check for leakage.
1. In the condition above, disconnect the tester probes of SST (wire) from the battery and check for fuel leakage from the injector.
Fuel drop: 1 drop or less in 16 minutes
