ES 350 V6-3.5L (2GR-FE) (2007)
5. REMOVE ENGINE ROOM SIDE COVER LH
6. REMOVE ENGINE ROOM SIDE COVER RH
7. REMOVE FRONT SUSPENSION CENTER UPPER BRACE
8. REMOVE V-BANK COVER SUB-ASSEMBLY
9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
10. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
a. Disconnect the 2 water by-pass hoses from the throttle with motor body assembly. (*1)
b. Disconnect the vapor feed hose. (*2)
c. Disconnect the throttle with motor body assembly connector and clamp. (*3)
d. Disconnect the No. 1 ventilation hose. (*4)
e Disconnect the union to check valve hose. (*5)
f.
Remove the bolt and vacuum hose clamp.
g. Disconnect the connector.