ES 350 V6-3.5L (2GR-FE) (2007)
a. Remove the 3 nuts.
b. Disconnect the 2 ECM connectors and remove the ECM.
1. Raise the 2 levers while pushing the locks on the 2 levers, and disconnect the 2 ECM connectors.
NOTE: After disconnecting the connector, make sure that dirt, water and other foreign matter do not contact the connecting part of the
connector.
2. Remove the ECM.
c. Remove the 4 screws and 2 ECM brackets.
INSTALLATION
1. INSTALL ECM