ES 350 V6-3.5L (2GR-FE) (2007)
3. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side.
4. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT: Use the same procedure for the RH side and the LH side.
5. REMOVE SIDE INSTRUMENT PANEL RH
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
7. REMOVE LOWER INSTRUMENT PANEL RH
8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
9. REMOVE NETWORK GATEWAY ECU
a. Remove the 2 nuts and the bolt and disengage the certification ECU with instrument panel wire.
b. Turn the certification ECU with instrument panel wire in the direction indicated by the arrow.
NOTE: Do not apply excessive force.
c. Disconnect the connector.