ES 350 V6-3.5L (2GR-FE) (2007)
d. Install the curtain shield airbag assembly with 5 new bolts.
Torque: 11 N.m (112 kgf.cm, 8 ft.lbf)
NOTE: Do not twist the curtain shield airbag assembly when installing it.
e. Install the 4 clips with the curtain shield airbag assembly to the body panel as shown in the illustration.
NOTE: Make sure that the pins of the clips are pushed in firmly.
f.
Mark the clips.
HINT: Mark the clips to make sure that they are not reused.
g. Connect the curtain shield airbag connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.