lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

ABOUT US
Front Seat Cushion Assembly (W/ Occupant Classification ECU, Occupant Classification Sensor)|Page 7641 > < Front Seat Cushion Assembly (W/ Occupant Classification ECU, Occupant Classification Sensor)|Page 7639

ES 350 V6-3.5L (2GR-FE) (2007)

Page 5
background image

i.

Remove the front seat assembly RH.

NOTE:  When removing the front seat assembly RH, be careful not to step on the yaw rate sensor mounted on the floor under the seat.

9. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

10. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

a. Using a screwdriver, remove the slide and vertical power seat switch knob.

HINT:  Tape the screwdriver tip before use.

11. REMOVE RECLINING POWER SEAT SWITCH KNOB

a. Using a screwdriver, remove the reclining power seat switch knob.

HINT:  Tape the screwdriver tip before use.

12. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

a. Remove the 7 screws.
b. Disengage the 2 claws and separate the front seat cushion shield assembly.
c. Disconnect the connector and then remove the front seat cushion shield assembly.

Front Seat Cushion Assembly (W/ Occupant Classification ECU, Occupant Classification Sensor)|Page 7641 > < Front Seat Cushion Assembly (W/ Occupant Classification ECU, Occupant Classification Sensor)|Page 7639