ES 350 V6-3.5L (2GR-FE) (2007)
14. INSTALL FRONT SEAT INNER TRACK BRACKET COVER RH
HINT: Use the same procedure for the inner side and outer side.
15. INSTALL FRONT SEAT HEADREST ASSEMBLY
16. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
a. Connect the front seat outer belt assembly RH with the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
b. Connect the connector.
17. INSTALL SEAT BELT ANCHOR COVER CAP RH
a. Engage the 7 claws and install the seat belt anchor cover cap RH
18. PERFORM INITIALIZATION
a. Perform initialization.
HINT: Some systems need initialization after reconnecting the cable to the negative battery terminal.
19. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK
a. Perform zero point calibration and sensitivity check.
20. INSPECT FRONT SEAT ASSEMBLY
21. INSPECT SRS WARNING LIGHT
a. Inspect SRS warning light.