ES 350 V6-3.5L (2GR-FE) (2007)
1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
4. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
5. REMOVE ENGINE UNDER COVER RH
6. REMOVE ENGINE UNDER COVER LH
7. REMOVE FRONT AIRBAG SENSOR
a. Remove the bolt and front airbag sensor from the body.
b. Disconnect the connector from the front airbag sensor.
INSTALLATION
1. INSTALL FRONT AIRBAG SENSOR
a. Check that the engine switch is off.
b. Check that the battery negative (-) cable is disconnected.
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.