ES 350 V6-35L (2GR-FE) (2007) Seat Belt System Service and Repair
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
2. REMOVE SEAT BELT ANCHOR COVER CAP
a. Hook a screwdriver to part A to bend it toward the inside of the cabin and release the claws. Pull the seat belt anchor cover cap RH upward
and remove it.
NOTE: Do not damage the seat belt.
3. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY
a. for Driver seat:
1. Remove the bolt and disconnect the floor end of the front seat outer belt assembly.
b. for Passenger seat:
1. Remove the bolt and disconnect the floor end of the front seat outer belt assembly.
4. REMOVE FRONT DOOR SCUFF PLATE
5. REMOVE REAR DOOR SCUFF PLATE
6. REMOVE LOWER CENTER PILLAR GARNISH