ES 350 V6-3.5L (2GR-FE) (2007)
a. Install the reclining power seat switch knob.
8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
a. Install the slide and vertical power seat switch knob.
9. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
10. INSTALL FRONT SEAT ASSEMBLY RH
a. Place the seat in the cabin.
b. Connect the connectors under the seat.
c. Connect the cable to the negative battery terminal.
d. Move the front seat assembly RH fully forward by operating the slide and vertical power seat switch knob.
NOTE: Check that the seat is locked.
e. Temporarily install the front side of the front seat assembly RH with the 2 bolts.
f.
Move the front seat assembly RH fully forward by operating the slide and vertical power seat switch knob.
NOTE: Check that the seat is locked.