ES 350 V6-3.5L (2GR-FE) (2007)
Wheel Speed Sensor: Testing and Inspection
Skid Control Sensor
INSPECTION
1. INSPECT SKID CONTROL SENSOR
a. Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:
-
The surface of the skid control sensor is cracked, dented, or chipped off.
-
The connector is scratched, cracked, or damaged.
-
The skid control sensor has been dropped.
b. Measure the resistance according to the value(s) in the table.
If the value is not as specified, replace the skid control sensor.