ES 350 V6-3.5L (2GR-FE) (2007)
/Page-1182004.png)
a. Install the starter commutator end frame cover to the starter commutator end frame assembly.
4. INSTALL STARTER ARMATURE PLATE
a. Align the claw of the armature plate with the groove inside the starter yoke assembly, and install the starter armature plate.
5. INSTALL STARTER COMMUTATOR END FRAME ASSEMBLY
a. Align the starter commutator end frame rubber with the groove of the starter yoke assembly.
b. Install the starter commutator end frame assembly to the starter yoke assembly.
NOTE: The magnet of the starter yoke assembly may attract the starter armature assembly when the starter commutator end frame assembly is
installed, causing the magnet to break.
6. INSTALL STARTER YOKE ASSEMBLY
a. Align the claw of the starter yoke with the groove inside the motor terminal starter kit.
