ES 350 V6-35L (2GR-FE) (2007) | Steering & Suspension | Power Steering Pump Repair
(c)
Using SST, install bolt (B) and tighten the 2 bolts.
SST 09249-63010
Torque: Without SST 43 N*m (439 kgf*cm, 32 ft.*lbf)
With SST 29 N*m (294 kgf*cm, 21 ft.*lbf)
NOTICE:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
^
This torque value is accurate when SST is parallel to the torque wrench.
2. CONNECT POWER STEERING FLUID PRESSURE SWITCH CONNECTOR
(a)
Connect the connector to the power steering fluid pressure switch.
3. CONNECT PRESSURE FEED TUBE ASSEMBLY
(a)
Install a new gasket to the pressure feed tube assembly.