ES 350 V6-3.5L (2GR-FE) (2007)
4. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY
(a)
Secure the steering wheel with the seat belt in order to prevent rotation.
HINT: This operation is useful to prevent damage to the spiral cable.
(b) Remove the bolt and slide the steering intermediate shaft assembly.
NOTICE: Do not separate the steering intermediate shaft assembly from the power steering link assembly.
(c)
Put matchmarks on the steering intermediate shaft assembly and the power steering link assembly.
(d) Separate the steering intermediate shaft assembly from the power steering link assembly.
5. SEPARATE TIE ROD ASSEMBLY LH
(a)
Remove the cotter pin and the nut.