ES 350 V6-3.5L (2GR-FE) (2007)
18. REMOVE CYLINDER END STOPPER HOLE SNAP RING
(a)
Using needle-nose pliers, remove the cylinder end stopper hole snap ring from the power steering rack housing.
19. REMOVE POWER STEERING RACK SUB-ASSEMBLY
(a)
Remove the power steering rack sub-assembly with the cylinder end stopper and power steering rack bushing.
20. REMOVE CYLINDER END STOPPER
(a)
Remove the cylinder end stopper from the power steering rack sub-assembly.
21. REMOVE POWER STEERING RACK BUSHING
(a)
Remove the power steering rack bushing from the power steering rack sub-assembly.
(b) Using a screwdriver, remove the O-ring from the power steering rack bushing.
HINT: Tape the screwdriver tip before use.