ES 350 V6-3.5L (2GR-FE) (2007)
(2) Using a punch and hammer, stake the power steering rack housing and rack guide spring cap at 3 equally spaced positions.
HINT: Tap the power steering rack housing and rack guide spring cap strongly and repeatedly to stake them securely.
(3) Using a straight hexagon wrench (24 mm (0.94 in.)), loosen the rack guide spring cap until matchmarks [b] and matchmarks [a] on the
rack guide spring cap are aligned. Measure the rotating torque required when loosening the rack guide spring cap.
Torque: 10 N*m (102 kgf*cm, 7.4 ft.*lbf) or more
15. INSPECT TOTAL PRELOAD
16. INSTALL DUST COVER
(a)
Apply MP grease around the control valve shaft as shown in the illustration.