ES 350 V6-3.5L (2GR-FE) (2007)
3. INSTALL REAR SUSPENSION MEMBER LOWER STOPPER LH
(a)
Install the rear suspension member lower stopper LH with the 2 nuts.
Torque: Nut A 55 N*m (561 kgf*cm, 41 ft.*lbf)
Nut B 38 N*m (388 kgf*cm, 28 ft.*lbf)
4. INSTALL REAR SUSPENSION MEMBER LOWER STOPPER RH
(a)
Install the rear suspension member lower stopper RH with the 2 nuts.
Torque: Nut A 55 N*m (561 kgf*cm, 41 ft.*lbf)
Nut B 38 N*m (388 kgf*cm, 28 ft.*lbf)
5. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM LH
(a)
Connect the rear No. 1 suspension arm (outer side) to the rear axle carrier with the bolt and nut and temporarily tighten the bolt and nut.
NOTICE: When temporarily tightening the bolt, keep the nut from rotating.
HINT: Insert the bolt from the front of the vehicle and temporarily install the bolt.
6. TEMPORARILY TIGHTEN REAR NO. 1 SUSPENSION ARM RH
HINT: Temporarily tighten the RH side using the same procedures as for the LH side.