Front Stabilizer Bar | Service and Repair | Suspension
3. INSTALL REAR STABILIZER BAR
(a)
Install the rear stabilizer bar with the 2 bolts. (LH Side)
Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf)
RH Side
(b) Install the rear stabilizer bar with the 2 bolts. (RH Side)
Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf)
4. INSTALL REAR STABILIZER LINK ASSEMBLY LH
(a)
Install the rear stabilizer link assembly LH with the 2 nuts.
Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
5. INSTALL REAR STABILIZER LINK ASSEMBLY RH
(a)
Install the rear stabilizer link assembly RH with the 2 nuts.
Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.
6. INSTALL CENTER EXHAUST PIPE ASSEMBLY
7. INSTALL TAIL EXHAUST PIPE ASSEMBLY
8. INSTALL REAR WHEELS
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
9. INSPECT EXHAUST GAS LEAK