ES 350 V6-3.5L (2GR-FE) (2007)
(e)
Install the front flexible hose and front speed sensor wire harness with the bolt.
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
NOTICE: Do not twist the front speed sensor wire harness when installing it.
(f)
Fully tighten the lock nut.
Torque: 70 N*m (714 kgf*cm, 52 ft.*lbf)
2. INSTALL FRONT STABILIZER LINK ASSEMBLY
(a)
Install the front stabilizer link assembly with the nut.
Torque: 74 N*m (755 kgf*cm, 55 ft.*lbf)
HINT: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
3. INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
4. INSTALL V-BANK COVER SUB-ASSEMBLY
5. INSTALL ENGINE ROOM SIDE COVER LH
6. INSTALL ENGINE ROOM SIDE COVER RH
7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
DISPOSAL