ES 350 V6-3.5L (2GR-FE) (2007)
(a)
Remove the 2 bolts and separate the front disc brake caliper assembly from the steering knuckle.
NOTICE: Use wire or an equivalent tool to keep the brake caliper from hanging by its flexible hose.
14. REMOVE FRONT DISC
15. INSPECT FRONT AXLE HUB BEARING LOOSENESS
16. INSPECT FRONT AXLE HUB RUNOUT
17. INSTALL FRONT DISC
18. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
(a)
Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.
Torque: 107 N*m (1,090 kgf*cm, 79 ft.*lbf)
NOTICE: Do not twist the brake hose when installing the front disc brake caliper assembly.
19. INSTALL FRONT SPEED SENSOR
20. INSTALL FRONT AXLE HUB NUT
(a)
Using a chisel and hammer, stake the axle hub nut.
21. INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
22. ADJUST FRONT WHEEL ALIGNMENT
23. CHECK ABS SPEED SENSOR SIGNAL