Tire Pressure Module for ES 350 V6-35L (2GR-FE) (2007)
(b) Install the tire pressure warning ECU with the nut.
Torque: 7.5 N*m (77 kgf*cm, 66 in.*lbf)
2. INSTALL LOWER INSTRUMENT PANEL RH
3. INSTALL PASSENGER SIDE KNEE AIRBAG ASSEMBLY
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
6. INSTALL INSTRUMENT SIDE PANEL RH
7. INSTALL FRONT DOOR OPENING TRIM COVER RH
8. INSTALL FRONT DOOR SCUFF PLATE RH
9. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL
10. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal.
11. REGISTER TRANSMITTER ID
12. INSPECT TIRE PRESSURE WARNING SYSTEM
13. INITIALIZE SYSTEM
NOTICE:
^
Be sure to register the transmitter IDs of all tires including the grand spare tire in the ECU before initialization.
^
Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.