ES 350 V6-35L (2GR-FE) 2007 Transmission & Drivetrain Seals & Gaskets Repair
SST 09316-10010, 09950-70010 (09951-07100)
Oil seal installation depth: -0.5 to 0.5 mm (-0.020 to 0.020 in.)
(b) Coat the lip of the oil seal with MP grease.
2. INSTALL FRONT TRANSAXLE CASE OIL SEAL
(a)
Using SST and a hammer, install a new oil seal to the transaxle housing.
SST 09308-14010
Oil seal installation depth: -0.5 to 0.5 mm (-0.020 to 0.020 in.)
(b) Coat the lip of the oil seal with MP grease.
3. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
4. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH
5. INSTALL FRONT AXLE ASSEMBLY LH
6. INSTALL FRONT AXLE ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
7. INSTALL FRONT SUSPENSION LOWER NO. 1 ARM LH
8. INSTALL FRONT SUSPENSION LOWER NO. 1 ARM RH
HINT: Use the same procedures described for the LH side.
9. INSTALL TIE ROD ASSEMBLY LH
10. INSTALL TIE ROD ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
11. INSTALL FRONT SPEED SENSOR LH
12. INSTALL FRONT SPEED SENSOR RH
13. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
14. INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
15. INSTALL FRONT AXLE HUB NUT LH
16. INSTALL FRONT AXLE HUB NUT RH
HINT: Use the same procedures described for the LH side.
17. INSTALL FRONT WHEELS
18. ADD AUTOMATIC TRANSAXLE FLUID
19. ADJUST FRONT WHEEL ALIGNMENT
20. CHECK ABS SPEED SENSOR SIGNAL