ES 350 V6-3.5L (2GR-FE) (2007)
Standard resistance
If operation cannot be done as specified, replace the park/neutral position switch.
INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Move the shift lever to the N position.
(b) Align the protrusions of the park/neutral position switch.
(c)
Install the park/neutral position switch to the control shaft with the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
NOTICE:
^
Before installing the park/neutral position switch, remove any dirt or rust on the installation portion of the control shaft. Be sure to install
the switch straight along the shaft while being careful not to deform the plate spring that supports the shaft. If the plate spring is deformed,
the park/neutral switch cannot be reinstalled correctly.
^
After installing the park/neutral position switch, confirm that the 2 protrusions on the switch are aligned.