ES 350 V6-3.5L (2GR-FE) (2007)
5. REMOVE SPEED SENSOR
(a)
Disconnect the connector.
(b) Remove the 2 bolts and speed sensor from the valve body.
INSTALLATION
1. INSTALL SPEED SENSOR
(a)
Coat the 2 bolts with ATF.
(b) Install the speed sensor to the valve body with the 2 bolts.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
(c)
Connect the connector.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY