ES 350 V6-3.5L (2GR-FE) (2007)
Shift Solenoid SL2
4. INSPECT SHIFT SOLENOID VALVE SL2
(a)
Measure the resistance according to the value(s) in the table below.
Standard resistance
If the value is not as specified, replace the shift solenoid valve.
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then
check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.
If the operation is not as specified, replace the shift solenoid valve.