ES 350 V6-3.5L (2GR-FE) (2007)
14. REMOVE FRONT AXLE HUB BEARING
(a)
Place the bearing inner race (outside) on the front axle hub bearing.
(b) Using SST and a press, press the front axle hub bearing until it contacts the SST.
SST 09527-17011, 09950-60010 (09951-00600, 09951-00400, 09952-06010), 09950-70010 (09951-07100)
(c)
Using SST, support the steering knuckle horizontally. Place it on the V-blocks as shown in the illustration.
SST 09527-20011, 09950-60010 (09951-00600, 09951-00400, 09952-06010), 09950-70010 (09951-07100)
(d) Using SST and a press, remove the front axle hub bearing from the steering knuckle.
INSTALLATION
1. INSTALL FRONT AXLE HUB BEARING