ES 350 V6-3.5L (2GR-FE) (2007)
/Page-1015002.png)
A.
Remove the TCM from the transaxle.
B.
Measure the resistance according to the value(s) in the table below.
Standard Resistance
C.
Measure the resistance according to the value(s) in the table below.
Standard Resistance: Check for Short
2.
If the transmission wire and shift solenoid SLT resistance is within specification, remove and replace the TCM. If NOT, complete Repair Manual
diagnostics to determine the cause of the M.I.L. "ON".
