GS 300 L6-3.0L (2JZ-GE) (1993)
3. ADJUST FRONT DOOR LOCK STRIKER
HINT: Tape a screwdriver tip before use.
(a) Check that the door fit and door lock linkages are adjusted correctly.
(b) Using the screwdriver, remove the striker cover.
(c) Adjust the striker position by slightly loosening the striker mounting screws, and hitting the striker with a hammer. Tighten the striker
mounting screws again.
Torque: 25 N.m (260 kgf.cm, 19 ft.Ibf)
(d) Install the striker cover.