GS 300 L6-3.0L (2JZ-GE) (1993)
Front Door: Service and Repair
Removal and Installation
FRONT DOOR REMOVAL
1. DISCONNECT FRONT DOOR CHECK FROM BODY
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, remove the door check cover.
(b) Using a torx wrench, remove the screw.
(c) Remove the door check from the body.
2. REMOVE FRONT DOOR SCUFF PLATE
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, pry out the front side of the clip.
(b) Using a clip remover, remove the scuff plate.
3. REMOVE FRONT DOOR PANEL