GS 300 L6-3.0L (2JZ-GE) (1993)
Front Door: Service and Repair
Disassembly and Reassembly
FRONT DOOR DISASSEMBLY
1. REMOVE FRONT DOOR WINDOW UPPER GARNISH
HINT: Tape a screwdriver tip before use. Using the screwdriver, pry loose two clips and remove garnish.
2. REMOVE DOOR INSIDE HANDLE BEZEL
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, pry outward where the handle and the upper side of the bezel meet.
(b) Using the screwdriver, pry outward where the handle and the lower side of the bezel meet and remove the rear half of the bezel.
(c) With the door handle in open position, pull the bezel out toward the rear.