GS 300 L6-3.0L (2JZ-GE) (1993)
6. REMOVE DOOR SPEAKER
(a) Disconnect the connector.
(b) Remove four screws and the speaker.
7. REMOVE DOOR FRAME GARNISH
(a) Remove the clip.
(b) Pry out the lower side of the garnish.
(c) Pull the garnish forward and remove the upper side clips.
(d) Pull the garnish forward and remove the rear side clips.
(e) Remove the garnish.
8. REMOVE DOOR INSIDE HANDLE
(a) Remove two screws.
(b) Disconnect two links from the handle.
9. REMOVE SERVICE HOLE COVER
(a) Using pliers, remove two screw grommets.
(b) Remove the cover by pulling at the edge by hand.
NOTICE: Do not tear the cover.