GS 300 L6-3.0L (2JZ-GE) (1993)
/Page-1430005.png)
HINT: Insert a shop rag inside the panel to prevent scratching the glass.
Remove two bolts and the glass.
15. REMOVE WINDOW REGULATOR
(a) Disconnect the connector.
(b) Using a clip remover, disconnect the clamp.
(c) Remove seven nuts and the window regulator.
16. REMOVE FRONT DOOR LOWER FRAME
(a) Remove two nuts and the front lower frame.
(b) Remove the bolt, the nut and the rear lower frame.
17. REMOVE FRONT DOOR LOCK
(a) Using a torx wrench, remove the screw.
(b) Remove the door lock cover.
(c) Disconnect the link from the door lock cylinder.
(d) Disconnect the link from the door outside handle.
(e) Using a clip remover, disconnect the clamps.
