GS 300 L6-3.0L (2JZ-GE) (1993)
21. REMOVE FRONT DOOR SCUFF PLATE
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, pry out the front side of the clip.
(b) Using a clip remover, remove the scuff plate.
22. REMOVE FRONT DOOR WIRE HARNESS
(a) Peel off the front corner of the floor carpet.
(b) Disconnect four connectors.
(c) Using a clip remover, disconnect the clamps.
(d) Remove the wire harness.
23. REMOVE INSIDE PANEL FRAME
Remove four screws and the frame.
FRONT DOOR ASSEMBLY
Assemble front door parts by following disassembly sequence in reverse.