GS 300 L6-3.0L (2JZ-GE) (1993)
BEFORE INSTALLING PARTS, COAT THEM WITH MP GREASE
(a) Apply MP grease to the window regulator rollers.
(b) Apply MP grease to the sliding surface of the door lock.
INSTALL FRONT DOOR CHECK
(a) Apply adhesive to the screw.
Part No.08833-00070,THREE BOND 1324 or equivalent
(b) Install the door check with the screw.
Torque: 8.8 N.m (90 kgf.cm, 78 in.Ibf)
INSTALL FRONT DOOR LOCK
(a) Apply adhesive to two screws.
Part No.08833-00070,THREE BOND 1324 or equivalent
(b) Install the door check with two screws.
Torque: 5.4 N.m (55 kgf-cm. 48 in.Ibf)
(c) Connect the connector.
(d) Connect the link to the outside handle.
NOTICE: Check that there is 0-1 mm free play beneath the door open rod.
(e) Connect the link to the door lock cylinder.
(f) Install the clamps.