GS 300 L6-3.0L (2JZ-GE) (1993)
Rear Door: Adjustments
REAR DOOR ADJUSTMENT
1. DISCONNECT BATTERY CABLE FROM NEGATIVE TERMINAL
CAUTION: Work must be started after 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal
cable is disconnected from the battery.
2. ADJUST REAR DOOR IN FORWARD/REARWARD AND VERTICAL DIRECTIONS
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, pry out the front side of the clip.
(b) Using a clip remover. remove the front door scuff plate.
(c) Using the screwdriver, pry out the rear side of the clip.
(d) Using a clip remover, remove the rear door scuff plate.