GS 300 L6-3.0L (2JZ-GE) (1993)
2. REMOVE FRONT DOOR SCUFF PLATE
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, pry out the front side of the clip.
(b) Using a clip remover, remove the scuff plate.
3. REMOVE REAR DOOR SCUFF PLATE
HINT: Tape a screwdriver tip before use.
(a) Using the screwdriver, pry out the rear side of the clip.
(b) Using a clip remover, remove the scuff plate.
4. REMOVE CENTER PILLAR LOWER GARNISH
HINT: Tape a screwdriver tip before use.
Using the screwdriver, remove the garnish.
5. REMOVE FRONT SEAT BELT RETRACTOR
(a) Disconnect the connectors.
(b) Remove two bolts and the retractor.
6. REMOVE REAR DOOR HINGE
(a) Remove two nuts from the body side.