GS 300 L6-3.0L (2JZ-GE) (1993)
Fig. 3 Exploded View Of Brake Assembly.
1.
Remove caliper bolts from torque plate, Figs. 1 through 3, then the caliper. Suspend caliper securely. Do not let caliper hang by brake hose.
a. Two anti-squeal springs, if equipped.
b. Two brake pads.
c. Four anti-squeal shims.
d. Two pad wear indicators.
e. Four pad support plates.
2.
Install pads as follows:
a. Install wear indicators if necessary.
b. Apply disc brake grease to both sides of inner anti-squeal shim.
c. Install anti-squeal shims to each pad.
d. Install pads with wear indicators facing downward.
e. Install anti-squeal springs if necessary.
3.
Remove small amount of brake fluid from reservoir.