GS 300 L6-3.0L (2JZ-GE) (1993)
(b) Check that the timing marks of the camshaft timing pulleys are aligned with the timing marks of the No. 4 timing belt cover. If not, turn the
crankshaft 1 revolution (360°).
11. Remove timing belt from camshaft timing pulleys.
HINT: (Re-using timing belt) Place matchmarks on the timing belt and camshaft timing pulleys as shown in the illustration.
(a) Alternately loosen the 2 bolts, and remove them, the tensioner and dust boot.
(b) Disconnect the timing belt from the camshaft timing pulleys.
12. Remove camshaft timing pulleys.
Using SST 09960-10010 (09962-01000), remove the bolt from the timing pulley. Remove both timing pulleys.