GS 300 L6-3.0L (2JZ-GE) (1993)
/Page-343004.png)
-
Disconnect the high-tension cord at the grommet. Do not pull on the cord.
NOTE: Pulling on or bending the cords may damage the conductor inside.
-
Disconnect the high-tension cords from the spark plugs. Disconnect the high-tension cords at the rubber boot. Do not pull on the cords.
NOTE: Pulling on or bending the cords may damage the conductor inside.
-
Remove the 7 high-tension cords and 8 cord clamps assembly.
