GS 300 L6-3.0L (2JZ-GE) (1993)
/Page-236004.png)
(b) Using a 5 mm hexagon wrench, remove the 6 bolts and belt cover.
8. Remove No.2 timing belt cover.
Using a 5 mm hexagon wrench, remove the 3 bolts, belt cover and gasket.
9. Remove drive belt tensioner.
Remove the 3 bolts and tensioner.
1O. Set No.1 cylinder to TDC/compression.
(a) Turn the crankshaft pulley and align its groove with timing mark "0" of the No.1 timing belt cover.
NOTICE: Always turn the crankshaft clockwise.
