GS 300 L6-3.0L (2JZ-GE) (1993)
-
Secure the high - tension cords with the 8 cord clamps as shown in the illustration.
2. Install cylinder head rear cover with the 4 bolts using a 5 mm hexagon wrench.
3. Install No. 3 timing belt cover.
-
Using a 5 mm hexagon wrench, install the timing belt cover with the 6 bolts.
-
Install the oil filler cap.
4. Install Throttle Body.
-
Install a new gasket to the intake air connector.
-
Slide the Throttle Body onto the stud bolts on the intake air connector.
-
Connect the following hoses:
Water bypass hose from water outlet (1)
Water bypass hose from No. 2 water bypass pipe (2)