GS 300 L6-3.0L (2JZ-GE) (1993)
Catalytic Converter: Service and Repair
PROCEDURE
Removal - Front Catalytic Converter
1. Remove No. 2 front exhaust pipe (front Converter).
-
Check that the Converter is cool.
-
Remove the 2 bolts and nuts holding the No. 2 front exhaust pipe to the front exhaust pipe.
-
Remove the 2 bolts and pipe support bracket from the transmission.
-
Disconnect the front exhaust pipe from the No. 2 front exhaust pipe, and remove the gasket.
-
Remove the 4 nuts, No. 2 front exhaust pipe and 2 gaskets.
Installation - Front Catalytic Converter